ASSEMBLY & OPERATING INSTRUCTIONSThis safety alert symbol identifies important safety messages in this manual.Failure to follow this important saf
Page 8ITEM NO. PART NO. DESCRIPTION QTY.1 40162100 TankAssembly 12 O/L 1/2” NC x 4-1/2 Hex Bolt 23 O/L 1/2” L
STEP 5: Connect the end of the 1/2” ID x 38” hydraulic pressure hose (1) coming from the fitting on the pump to the fitting on the valve . See illust
Page 10STEP 8: Attach the two fenders (1) to the tank/axle using the four 1/4” NC x 3/4” hex cap bolts (2), the four 1/4” flat washers (3 ) , the f
Page 11BEAM ASSEMBLY BREAKDOWNO/L- Obtain locally. Common fasteners available through hardware and farm stores.ITEM NO. PART NO. DESCRIPTIO
Page 12TONGUE ASSEMBLY BREAKDOWNITEM NO. PART NO. DESCRIPTION QTY. 1 17280300 M10 x 1.5 Nylock Nut 2 2 17271600 M10 x 1.5 x
CAUTION: DO NOT START OR RUN THE ENGINE BEFORE ADDING OIL IN THE HYDRAULIC RESERVOIR AND OIL INTHE ENGINE.OPERATING INSTRUCTIONSWARNING: Read and th
CAUTION:NOTE: The engine maximum governed speed is preset at the factory at 3600 RPM no load speed. When splitting wood the throttleshould be set at t
MAINTENANCE1) Consult the operating and maintenance instructions of the engine manufacturer for engine care and maintenance.2) Always check the oil le
NOTESModel No. ____________________ Serial No. _____________________________Date of Purchase _______________ Place of Purchase ______________________
SPECIFICATIONSAAenignEenignEcc042adnoHpmuPmpg61,egatS-owTrednilyCekortS.ni42xretemaiD.ni5evlaVnruteR-otuAecroFgnittilpSmumixaMsnoT53htgneLgoLmumixaM.n
Table of Contents Page(s)Important Safety Information...
WARNING: Read and thoroughly understand all instructions and safety information before assem-blingor operating this log splitter. Failure to do so ma
PART NUMBER: 51018900LOCATION: TOP OF HYDRAULIC CYLINDERPART NUMBER: 52023200LOCATION: HYDRAULIC TANKLOWER TANK, RIGHT CORNERPART NUMBER: 52055200LOCA
GENERAL SAFETYEVERNEVER allow children to operate this log splitter. NEVER allow adults lacking proper instructions and understanding tooperate this l
KNOW how to stop the log splitter and disengage the controls before operating it.NEVER place hands or feet between the log and splitting wedge during
HYDRAULIC SAFETYThe hydraulic system of your log splitter requires careful inspection along with the mechanical parts. Be sure toreplace frayed, kin
IMPORTANT NOTE:This log splitter is equipped with an internal combustion engine and should not be used on or near any unimprovedforest-covered, brush
ASSEMBLY INSTRUCTIONSNOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it becomenecessary to
Comments to this Manuals